FREE FREIGHT ON PARTS IN AUSTRALIA ON ORDERS OVER $150

Westerbeke 44C Four Diesel Engine (38HP at 3000 RPM)

In Stock at Gold Coast. Does not qualify for free freight.

Specifications
Number of cylinders 4 Cylinder, vertical in-line
Output 38HP (28.3kw) at 3000 rpm
Cycles 4 cycle
Displacement 107.27 cu. in. (1.758 liter)
Bore and stroke 3.07" x 3.62" (78 mm x 92 mm)
Compression ratio 22:01
Maximum angle of installation Not to exceed 14° in all directions
Maximum angle of operation Not to exceed 30° for 30 min.
Crannkshaft direction Counterclockwise as viewed of rotation from flywheel end
Propeller shaft dir. of rotation Right hand - Std. transmission
Dry weight 416 lbs. (188.7 kilos)
Combustion system Swirl type
Aspiration Naturally aspirated
Lubrication system Forced lubrication by gear pump
Cooling system capacity 7 quarts (6.6 liters)
Starting aid 12 volt sheathed type glow plug
Engine stop Manual type
Fuel injection pump Bosch type
Governor Centrifugal type
Injectors Throttle type
Fuel Filter Primary
Lube oil filter Full flow, spin-on element
Lubricant capacity 6.3 quarts (6.0 liters)
Fuel transfer pump Electrical
Fuel supply and return piping 1/4" ID (6.35 mm) minimum
3/8" ID (9.53 mm) maximum
Starting motor 12 volt, solenoid actuated
Battery charging Alternator 50 ampere (12 Volts)
Cold cranking amps 160 at 79 degrees F
Alternator/regulator Automatic, solid state built-in
Electrical system 12 volts DC, negative ground
Optional Equipment
Captain panel with alarm (tachometer with lights)
Admiral panel with alarms (tachometer with gauges)
Dual station senders
Other gear ratios Consult local distributor
Hydraulic transmissions Consult local distributor
Remote expansion tank
72 or 90 amp alternator in place of standard
Muffler and fittings
“A” on board spare parts kit
“B” extended cruising spare parts kit
Anti-siphon valve for overboard cooling discharge water
45 degree water injected exhaust elbow
Propeller shaft couplings (rigid/flexible) available standard sizes

Advanced Specifications & Dimensions