FREE FREIGHT ON PARTS IN AUSTRALIA ON ORDERS OVER $150

Westerbeke Petrol Generator 3.0 BPMG

Specifications
Number of Cylinders 2 Cylinder, horizontal in-line
Type 4 cycle
Displacement 20.0 cu. in. (.33 liter)
Bore and stroke 2.32" x 2.36" (59.0mm x 60.0mm)
Compression ratio 9:01
Rated RPM 2200
HP @ Rated RPM 6.0 HP
Maximum angle of operation Not to exceed 25° in all directions
Exhaust elbow conn. 2.0" OD (50.8mm)
Raw water conn. .50" OD (12.7mm)
Dry weight 165 lbs (75 kg)
Combustion system Semi-spherical type
Aspiration Naturally aspirated
Lubrication system Forced pump
Cooling system Raw water
Full load fuel consumption .4 GPH (1.5 LPH)
Carburetor Side draft type
Governor Electronic
Lube oil filter Full flow, spin on element
Lubricant capacity 1.5 quarts (1.4 liters)
Fuel transfer pump Mechanical type
Fuel supply piping .25" ID (6.35mm)
Starting motor 12 volt, .6kW
Battery charging 11 amps, flywheel alternator
Cold cranking amps 70 amps @ 70 degrees F
Electrical system 12 volts DC, negative ground

Optional Equipment
Fresh water cooling (heat exchanger)
Remote start-stop panel
Ship-shore switch
Hydro-hush muffler and fittings
“A” on-board spare parts kit; “B” extended cruising spare parts kit
Anti-siphon valve for overboard cooling water discharge
Technical Manual

Advanced Specifications